MIK-RD701 Guided wave radar level meter
-
Specification
| Product | Guided wave radar level meter |
| Model | SUP-RD701 |
| Measure range | 0-30 meters |
| Application | Liquids and bulk solids |
| Process Connection | Thread/ Flange |
| Medium Temperature | -40℃~130℃(Standard)/-40～250℃(High temp) |
| Process Pressure | -0.1 ~ 4MPa |
| Accuracy | ±10mm |
| Protection Grade | IP67 |
| Frequency Range | 500MHz-1.8GHz |
| Signal Output | 4-20mA (Two-wire/Four) |
| RS485/Modbus | |
| Power supply | DC(6~24V)/ Four-wire DC 24V / Two-wire |
-
Introduction
-
Product Size
-
Installation guide
H—-Measuring range
L—-Empty tank height
B—-Blind area
E—-Minimum distance from probe to tank wall >50mm
Note:
The top Blind area refers to the minimum distance between the highest material surface of the material and the measurement reference point.
Blind area at the bottom refers to a distance that cannot be accurately measured near the bottom of the cable.
The effective measurement distance is between the top Blind area and the bottom Blind area.
Write your message here and send it to us
